Project Execution

In this project I am using two way security to keep the home safe.

Firstly, I am using Finger print based access controller to provide access only to the authorized person by using the fingerprint, I can also use any RFID Card or Password or a combination of two or more inputs to provide access to the house. It can be used at the entrance of the house or at any place which require more security such as safe based upon the requirement of the house holder. Materials I am using for this are as follows:

S. No	Products	Make	Description	Qty
1	Biometric Machine	Realtime	Fingerprint based biometric access reader	1
2	EM Lock		Electro magnetic Lock	1
3	Push to exit		Push to Exit Switch	1
4	Cable		2 Core Co-axial Cable	10 Mtr

Still if the intruder manages to enter the house through any window or using any means then also the image will be captured in CCTV installed at the residence. If that person again tries to temper the NVR, then still the snapshots of that place will be sent to the assigned Email ID within the NVR and the identity of the intruder can be easily found. For executing next step of my project that is of CCTV, I am using the following materials:

S. No	Products	Make	Description	Qty
1	IP Dome Camera	Dahua	Internet Protocol Based Indoor Camera 1.3 MP	1
2	NVR	Hikvision	4 Channel Network Video Recorder	1
3	Switch	Advik	4 Port Power over Ethernet Switch	1
4	Router	Tenda	Router	1
5	HDD	Toshiba	500 GB Hard Disc Drive for Recording	1
6	Cable	D-Link	CAT 6 Network Cable	25 Mtr